Hi there.

According to the information I have collected from the service book on a
2005 passat the car has AVF (1.9TDi PD) engine. But according to the
information I have there is no AVF engine on 2005 passat ?

We are about to fit CC to the car, and want to confirm the wiring.

According to my wire diagram we should connect the following pins from the
CC stalk (10 pins output from the CC) to the 15 pins white connector in the
plenum chamber:

Pin 4 to Pin 7 on CC
Pin 7 on CC -> Pin 10 in Plenum chamger
Pin 5 on CC -> Pin 7
Pin 2 on CC -> Pin 8
Pin 3 on CC -> Pin 9

And supply 12v+ to pin 6 on CC.

Anyone that can please confirm this is correct for the above mentioned car ?